For turners: open the calliper by just pulling the legs apart
Spacing nut between the legs rather than outside facilitates
Position and then set the spacing nut to the wall thickness
Open callipers, remove and measure tip gap
Spacing nut adjustable for any thickness
From 0 to 343mm on 420mm model and 0 to 140mm on 230mm model
Respective throat depths: 295mm and 140mm
Equally good for dimensional take-offs
Steel with brass fittings
Primarily used by turners, these thickness calipers can be fitted into virtually any shape of vase or bowl. To use, open the caliper by just pulling the legs apart (having the spacing nut between the legs rather than outside them allows this), put in position and then set the spacing nut to the wall thickness. Open calipers, remove and measure tip gap. The spacing nut can be adjusted for any thickness from 0 to 343mm on the 420mm model and 0 to 140mm on the 230mm model. The respective throat depths (from nut to tip) are 292mm and 140mm. These are equally good for dimensional take-offs of almost any oddly shaped object. Steel with brass fittings. Made in France.
Please share this Veritas product:
Contact us for more info on Veritas Thickness Calipers – 230mm (9″) Price includes UK mainland delivery. Use the livechat below or email us for more info.
Carriage for the UK Mainland is FREE on all Veritas tool orders over £100 - typically arriving within a few days. We also great prices for European and Worldwide shipping on all engineering tools. THERE ARE CURRENTLY SUPPLY DIFFICULTIES IN THE UK AND WE DON'T HAVE STOCK