Veritas Tools
Veritas Tools
 



Veritas Drilling Jigs


Veritas Woodworking >  Veritas Drilling Jigs


Veritas Dowelling Jig  (Ref: 474668)

Veritas Dowelling Jig

For centred dowelling or doweling boards to a reference face
Micrometer clamp head can be set from 6 to 13mm from the centre line
Setting is positive and accurate to a few thousands of an inch
Movable clamp heads will grip work as small as 13mm x 35mm
Chain drill dowel holes using the tapered pin to register off the last hole drilled
Movable bushing carrier includes 3 hardened steel bushings: 1/4", 8mm (5/16"), and 3/8".
All aluminum parts anodized black, except the red bushing carrier
Register pins and clamping fittings are turned brass


This jig will not only do centered dowelling, but it will dowel boards of different thicknesses to one reference face; the assembly is perfectly flat on one side and all thickness variations are on the other side. This saves a lot of planing and scraping time.Using a dial, each micrometer clamp head can be set from 6mm(1/4") to 13mm(1/2") from the center line to handle work from 13mm(1/2") to 25mm(1") thick. The setting is positive and accurate to a few thousandths of an inch. The movable clamp heads will grip work as small as 13mm(1/2") x 35mm(1.3/8").

With boards of constant thickness, you can set the jig for centered dowelling. For boards of uneven thickness, you set the heads for a constant set back from the reference face.By using the tapered pin to register off the last hole drilled, you can quickly chain drill dowel holes for tabletops or panels. The movable bush carrier comes with 3 hardened steel bushings: 1/4", 8mm( 5/16"), and 3/8". Other sizes are available. All turnings are solid brass. Machined parts are anodized aluminum.

73.80 88.56


Quantity:  






Veritas Shelf-Drilling Jig  (Ref: 474283)

Veritas Shelf-Drilling Jig

This drilling jig eliminates the time-consuming layout work usually associated with installing shelf supports. Rather than mark the location of every hole before drilling, you set the jig's rails at the desired inset from the edge, fix them in position with the thumbscrews on the clamp rods, and then drill. The jig guarantees that the holes will be exactly opposite each other and at equally spaced intervals.

Twin-register pins positioned in the rails fit into holes you have already drilled, ensuring that the holes will continue to be accurately spaced. An entire upright can be accurately chain drilled with no chance of error and no need for detailed measuring. The register pins have tapered tips and fit snugly into any hole from 5mm to 10mm (3/16" to 3/8"). The 610mm(24") long rails each have 20 holes drilled at 1" intervals. Ample space for chip clearance is provided to allow for easy withdrawal of your bit and to prevent jamming or burning. The bush carrier registers perfectly in each hole and is easily moved along the rails. You are assured of holes drilled at exactly 90° because the hardened bushings are 20mm(13/16") long (substantially longer than others available).Ten hole sizes can be drilled with the bushings that come as standard equipment, a soft (unhardened) bushing (you drill to size) for custom application is also included.

The jig comes with regular-length clamp rods for use with material 300mm(12") wide or narrower. Long rods are available for material up to 610mm(24") wide, and extra-long rods for work up to 915mm(36") wide. All aluminum parts are anodized black, except for the red bush carrier. The steel rods are ferro-blacked. Register pins, fixing and clamping knobs are turned brass with knurled heads. A 7mm sleeve-setting punch with hardwood handle is included. It will set the most common European support/sleeve combinations neatly without damaging the sleeve or upright. Eleven bushings are included with the jig: sizes 5, 6, 6.75, 7, 7.5, 8(5/16"), and 9mm, 7/32", 1/4", and 3/8" and an unhardened bushing. Please note: The long & extra long rods are available separately.

108.12 129.74


Quantity:  



Related products:
1. Veritas, Pair Extra-Long Rods for Shelf-Drilling Jig- (Ref: 476327)





Veritas, Pair Extra-Long Rods for Shelf-Drilling Jig-  (Ref: 476327)

Veritas, Pair Extra-Long Rods for Shelf-Drilling Jig-

11.26 13.51


Quantity:  






Veritas Woodworking >  Veritas Drilling Jigs



Veritas Drilling Jigs
Buy online at www.quality-woodworking-tools.com with FREE mainland UK delivery for all woodworking tools





Veritas Tools Homepage
Veritas Checkout
  View Basket
Veritas Tools UK Delivery
Free UK Delivery

Newsletter Subscription