Veritas Tools
Veritas Tools
 



Veritas Miscellaneous


Veritas Woodworking >  Veritas Miscellaneous


Veritas Mitre Box Guides  (Ref: 104631)

Veritas Mitre Box Guides

Key Features
Self-lubricating, tough, durable guides
Custom build or upgrade a standard mitre box
Set includes 45°, 90° and 135° guides
Elongated mounting hole for close adjustment
Provides fast and accurate guide for mitre cuts

A good mitre box is very useful, providing a quick and accurate guide for cutting 90° or 45° angles.

These Veritas saw guides give you the opportunity to make your own accurate mitre box or upgrade an existing one. You can custom build a box to fit a particular saw. Moulded from Delrin®, a modern bushing material, the guides are self-lubricating, allowing your saw to glide smoothly through the cut. Delrin® is an engineering thermoplastic commonly used for precision parts requiring high stiffness, low friction and dimensional stability.

The set includes 45°, 90° and 135° guides, enough to create a single mitre box. The guides are reusable, allowing you to create a new mitre box when the old one wears out. The guides slot into a 3.2mm groove on the top of each mitre box wall. The elongated mounting holes let you adjust the spacing of the guides for a close fit to your saw blade.

9.79 11.75


Quantity:  






Veritas Plunge Base for Rotary Multi-Tools  (Ref: 102163)

Veritas Plunge Base for Rotary Multi-Tools

Key Features

Fits any tool with 3/4" x 12 tpi threaded collar, as standard on Dremel and others
Converts almost any rotary multi-tool into a miniature plunge router
Lock lever for continuous cuts
Micro-adjustable depth stop gives precise control
100 x 75mm footprint, easy to position and manoeuvre
Aluminium with stainless steel rods and knobs
Made in Canada

This plunge base converts almost any rotary multi-tool into a miniature plunge router for fine detail work. The 3/4" x 12 tpi threaded collar, found as standard on Dremel and many other rotary multi-tools, screws directly into the base. It gives you precise depth control when cutting recesses for hardware or inlay, or even freehand relief carving. The 100 x 75mm footprint makes it easy to position on narrow surfaces and close to edges. One side features a cutaway giving a view of the exact position of the blade. A micro-adjustable depth stop offers very precise control over the cutting depth. As with a full size router you can plunge or use the lock lever for continuous cuts. The base has rounded grooves on either side which form a natural grip for your fingertips giving better control. Made in Canada from aluminium with stainless steel rods and knobs.

50.23 60.28


Quantity:  






Veritas Fence & Centre Kit for Plunge Base  (Ref: 102164)

Veritas Fence & Centre Kit for Plunge Base

Key Features

Fits the Veritas Plunge Base for Rotary Multi-Tools
Make parallel cuts using the edge of a workpiece as a reference
Fences for straight cuts and work on curved edges
Kit includes a circle cutting attachment with three interchangeable centres
Cuts circles up to 445mm diameter
Made in Canada from aluminium with stainless steel rods

This side fence accessory fits the Veritas Plunge Base for Rotary Multi-Tools. It lets you make parallel cuts using the edge of a workpiece as a reference. There are two straight fences made of torrefied maple (both 150mm long): a standard 38mm wide and a 16mm for thin stock. Two round headed inserts allow you to make cuts parallel to a curved edge. In addition, the kit includes a circle cutting attachment for accurately cutting arcs or circles. The circle cutting attachment has three interchangeable centres: a sharp pin, a 6.3mm post and a flat disc. The 150mm fence rods allow offsets from zero to 115mm with the straight fences and diameters from 13mm to 445mm with the circle attachment. Made in Canada from aluminium with stainless steel rods

49.41 59.29


Quantity:  






Veritas Precision Adjuster for Plunge Base  (Ref: 102165)

Veritas Precision Adjuster for Plunge Base

Key Features

Fine fence adjuster for Veritas fence and centre kit
Allows fine-tuning for very precise work
Each half turn moves the fence by 0.4mm(1/64)
Aluminium body with stainless steel knobs
Made in Canada

Made to fit the Veritas fence and centre kit, this optional fine fence adjuster clamps onto the fence rods and attaches to the fence holder or circle head. It allows you to fine-tune the distance between the cutter and the fence for very precise work. Each half turn of the adjusting knob moves the fence in or out by 0.4mm(1/64"). Made in Canada from aluminium with stainless steel knobs.

17.03 20.44


Quantity:  






Diamond Cone Mortice Chisel Sharpener  (Ref: 502458)

Diamond Cone Mortice Chisel Sharpener

Key Features
Significantly improves chisel performance
Specially made diamond coated cones
Suitable for most Taiwanese and Japanese mortice chisels
Coarse grit cone gives an initial grind
Fine honing cone creates a sharp even edge
For use in a drill press or morticer with drill chuck adaptor only
Description
Sharpening a mortice chisel significantly improves performance. We can recommend this pair of specially made diamond coated cones for most Taiwanese and Japanese mortice chisels, and Veritas square hole punches. A coarse grit cone gives an initial grind, followed by a finer honing cone to create a sharp even edge.
Instructions
Use the cones in a drill press or your morticer if you have a chuck adaptor (a handheld drill is neither suitable nor safe). Clamp the bit vertically and securely, or drill a hole in a block of wood the same diameter as the chisel’s shank. The chisel must be held firmly and perpendicular. Fasten the coarse cone in the chuck and align it with the chisel so it centres exactly in the end of the chisel, do this BEFORE switching on. Running at low speed (150 to 250rpm), gently lower the cone until it just makes contact with the mortice bit. Carefully grind until you obtain a clean surface around the entire bevel. Replace it with the 350-grit cone and repeat the process, lightly honing the inside bevel. Use a fine flat stone lap the sides of the bit to remove any burrs

3.64 4.37


Quantity:  






Veritas Pair of Right-Angle Assembly Clamps  (Ref: 202403)

Veritas Pair of Right-Angle Assembly Clamps

Key Features
Made from glass fibre reinforced nylon
Single handed ratchet mechanism
Hold boards or panels from 10mm to 20mm thick at 90°
Description
Dry assembly of a carcass or even trying to hold two panels together to place a fixing screw often leads to much cussing and the desire for a third or even fourth hand. Right-Angle assembly clamps are that third and fourth hand, made from glass fibre reinforced nylon they have a single handed ratchet mechanism allowing them to be squeezed together across a corner, providing a firm hold. The clamps hold boards or panels from 10mm to 20mm thick at 90°, with a variation of up to 6mm in thickness between the panels. Use for test fitting, holding whilst applying cramps or placing a fixing. Overall size 100 x 75 x 40mm, sold in pairs.

6.15 7.38


Quantity:  






Veritas Chair Doctor Glue 114 ml  (Ref: 510451)

Veritas Chair Doctor Glue 114 ml

Key Features

Suitable for Wood
Interior (Furniture)
Setting time 1-24 hours

Chair Doctor Glue does exactly what the name implies - it fixes chairs. If a chair has a loose rung an injection of Chair Doctor Glue will first swell the rung and then bond it in position. The secret is the low viscosity. It soaks into the end grain, swells the wood then 'freezes' the wood in its swollen state as it cures. A film of dry glue is left on the walls of the wood cells preventing contraction. The glue can penetrate the narrowest of cracks and is supplied in a bottle with a micro dropper applicator tip which lets you place the glue accurately. For regular cabinetmaking PVA adhesive is the best choice; but for fixing loose joints where disassembly is not an option Chair Doctor Glue is the most suitable. Available as a 57ml(2fl.oz) bottle or the Pro Kit which contains 114ml(4fl.oz) of glue, syringe and three different injection needles (1.25, 0.9 and 0.5mm).

7.88 9.46


Quantity:  






Veritas Chair Doctor Glue - 57ml  (Ref: 510450)

Veritas Chair Doctor Glue - 57ml

Suitable for Wood
Interior (Furniture)
Setting time 1-24 hours


Chair Doctor Glue does exactly what the name implies - it fixes chairs. If a chair has a loose rung an injection of Chair Doctor Glue will first swell the rung and then bond it in position. The secret is the low viscosity. It soaks into the end grain, swells the wood then 'freezes' the wood in its swollen state as it cures. A film of dry glue is left on the walls of the wood cells preventing contraction. The glue can penetrate the narrowest of cracks and is supplied in a bottle with a micro dropper applicator tip which lets you place the glue accurately. For regular cabinetmaking PVA adhesive is the best choice; but for fixing loose joints where disassembly is not an option Chair Doctor Glue is the most suitable. Available as a 57ml (2fl.oz) bottle or the Pro Kit which contains 114ml(4fl.oz) of glue, syringe and three different injection needles.

6.29 7.55

Size
57ml (code 510450) (6.20)
114ml (code 510451) (7.50)


Quantity:  






Veritas Cornering Tool Kit  (Ref: 510441)

Veritas Cornering Tool Kit

Small moulding planes designed to cut fixed radius curves on an edge
CT1 cuts 1.6mm (1/16") and 3.2mm (1/8") radius
CT2 cuts 4.8mm (3/16") and 6.3mm (1/4") radius
Easy to use - cuts on either push or pull stroke
Kit supplied with extrusion with all 4 radii and 600g silicon carbide abrasive


Although at first sight they may not look it, these are actually small moulding planes designed to cut a fixed radius curve on an edge. Supplied in pairs, each tool is ground with a different radius on each end - one cutting 1.6mm (1/16") and 3.2mm (1/8") radius and the other 4.8mm (3/16") and 6.3mm (1/4"). Easy to use, the plane will cut on either the push or pull stroke, remove material quickly and cleanly and will not cut more than their predetermined radius. Included in the kit is an extrusion with all 4 radii on it and a piece of 600g silicon carbide abrasive so the tools can be honed correctly and are always ready for use.

26.50 31.80


Quantity:  






Veritas Flush Plane  (Ref: 368047)

Veritas Flush Plane

50mm(2") wide
Flush chisel - multitude of flush trimming uses
Unrestricted travel to centre of widest boards
Reversible blade to protect edge when not in use


Is it a chisel? Is it a plane? Well, in reality it is a 50mm (2") wide, go anywhere flush chisel with a multitude of flush trimming uses and unrestricted travel to the centre of the widest boards. Immensely powerful rare earth magnets really hold the blade in position when working hard.

30.59 36.71


Quantity:  






Veritas Magnetic Corner Chisel  (Ref: 475273)

Veritas Magnetic Corner Chisel

This chisel is designed specifically for squaring off the corners of routed hinge gains. The 9.5mm(3/8") square blade is precision ground with a 35° bevel on each face, made of long wearing A2 tool steel, and hardened to Rc60. Though it can be used on its own, greater accuracy is ensured by use of the 50mm tall anodized aluminum guide block (included). Two embedded rare earth magnets hold the chisel squarely in place, while the outside faces of the block register against the routed pocket. A tap on the chisel cuts the corner square and flush with the routed edges. You will come to appreciate the fine edge and long wearing properties of the chisel when you finally have to resharpen it, as sharpening corner chisels is never an easy task!

28.58 34.30


Quantity:  






Veritas Metal Bender  (Ref: 476080)

Veritas Metal Bender

Allows you to form a metal part with control
Made of high-strength malleable cast iron
Capable of bending up to 3.2mm(1/8") mild steel
Clamps against a vice jaw using embedded rare earth magnets
Make bends up to 90° for angle brackets and sheetmetal parts
A versatile and inexpensive tool for any workshop


There are times when you need to bend a metal part, and simply using a vice and some brute force just won't do the job. This metal bender allows anyone to form a metal part with control.The product has two parts: the male die and the V-block. Both are made of high strength malleable cast iron, capable of bending up to 3.2mm(1/8") mild steel. Each piece (about 75mm(3") long by 28mm(1.1/8") wide) clamps itself against a vice jaw using embedded rare earth magnets.The main purpose of the metal bender is to make bends up to 90° for such things as angle brackets and sheet metal parts. Using the V-block on its own, you can securely hold rounds such as rods, tubes and dowels. Combining the V-block with a C-clamp makes easy work of repairing a chair leg. The male die on its own can hold complex curved or concave parts between the jaws. A versatile and inexpensive tool for any workshop.

13.97 16.76


Quantity:  






Veritas Auger Gimlets  (Ref: 476739)

Veritas Auger Gimlets

Ideal for starting short screws or screws in awkward places
Tapered screw tip & auger body
Seven sizes from 2mm to 5mm (5/64" to just over 3/16") to pre-drill for screw sizes No.2 to No.10
Ferro-blacked tempered steel


The Veritas Auger Gimlets are perfect for starting screws, auger gimlets have a tapered screw tip and an auger body. The seven sizes in the set range from 2mm to 5mm (5/64" to just over 3/16"), which will handle the pre-drill for screw sizes No.2 to No.10. The Veritas Auger Gimlets are particularly useful for short screws or screws in awkward places, both of which present problems for power pre-drilling. In tempered steel, ferro-blacked in the traditional manner, this set was made by a small European maker.

8.29 9.95


Quantity:  






Veritas Screw Lifter  (Ref: 477217)

Veritas Screw Lifter

As often happens when you are installing screws in panelling, drywall, shelf brackets, etc., you just miss the stud and find yourself with a screw that you have to remove and no easy means to remove it. This cunningly designed spring-steel tool will do the job. You can either slip the slim tip underneath the screw and press the arched body to provide removal tension, or you can flatten the arch and engage the screw in the keyhole cut-out and have both hands free to operate a screwdriver. The third alternative is to attack the screw with pliers, screwdrivers and chisels, creating a crater that would do justice to a small nuclear device. The screw lifter weighs less than 35g, takes up virtually no room in a tool box and stands ready at all times to eliminate one of the frustrations of life.

9.10 10.92


Quantity:  


People who bought this item also bought:
1. Veritas Block Plane Chamfer Guide (Ref: 475863)





Veritas Pullshave  (Ref: 701974)

Veritas Pullshave

For hollowing or recessing an area
Tool steel blade
Ductile cast iron body
Large rear handle and a front knob of bubinga
Twin adjustment thumb wheels


The Veritas pullshave was designed for hollowing or recessing an area; for example, shaping and smoothing chair seats. The unique design is the result of taking a convex spokeshave and reconfiguring it with a handle and knob to make it both easier to use and better suited to rigorous work. It will do the work associated with traditional inshaves and travishers. The 3mm(1/8") thick, lapped, A2 tool steel blade, and carefully machined blade bed and cap iron, all combine to produce chatter free cutting. The blade bed angle is 45° and the sole radius is 89mm (3.1/2"). The ductile cast iron body is fitted with a large rear handle and a front knob of Bubinga. The twin adjustment thumb wheels quickly and accurately control the depth of cut.

93.67 112.40


Quantity:  






Veritas Flat Bob  (Ref: 510449)

Veritas Flat Bob

This is a plumb bob that won't drive you mad. All the annoying aspects of traditional plumb bobs have been designed out. The flat sides prevent rolling and allow the bob to 'settle' very quickly. The 8' of nylon cord is held on a windlass which clips neatly into the pencil slot when not in use. A protective cap prevents the point from damage when not in use. It's a 'just gotta have' type of tool as well as being extremely useful. Length 90mm. See Marking Pencils section for pencils to go with your plumb bob.

13.89 16.67


Quantity:  






Veritas P1027 Plumb Bob  (Ref: 504092)

Veritas P1027 Plumb Bob

Key Features

Sleek design of stainless steel and black anodised aluminium
92mm long with a 22mm diameter body
Finely pointed tip
32mm diameter stand, with internal ring magnet
2.4m long braided nylon cord
Cord and drawstring bag included
Made in Canada

19.75 23.70


Quantity:  






Veritas Woodworking >  Veritas Miscellaneous



Veritas Miscellaneous
Buy online at www.quality-woodworking-tools.com with FREE mainland UK delivery for all woodworking tools





Veritas Tools Homepage
Veritas Checkout
  View Basket
Veritas Tools UK Delivery
Free UK Delivery

Newsletter Subscription