Veritas Tools
Veritas Tools
 



Veritas PM-V11 Butt Chisels


Veritas Woodworking >  Veritas PM-V11 Butt Chisels


Veritas PM-V11 Butt Chisel - 1/2"(12.7mm)  (Ref: 506308)

Veritas PM-V11 Butt Chisel - 1/2

THIS IS ONE SINGLE CHISEL OF THE SIZE ABOVE

Key Features

Extremely durable PM-V11 steel alloy
At least twice the edge life of A2 steel
Highly wear-resistant, yet easy to sharpen
Blades lapped to a flatness tolerance of +/-0.0127mm
Maple handle, kiln-baked to seal it against humidity changes
Hardness is HRC 61-63
All have 2° micro bevels and require only final honing before use
Made in Canada


Butt chisels are made in wider sizes than most chisels, making them efficient for wasting out large areas, such as the mortices for installing butt hinges. They also have shorter blades that some woodworkers find offer improved control. Made from PM-V11 steel alloy, the blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance and minimal friction when working into an angled corner or a tight recess.Each blade is lapped flat. The blade and handle are connected with a tang and a socket-like stainless steel ferrule that seats directly onto the shoulder of the blade, with flats on the tang to prevent the handle from rotating. The hard maple handle has been torrefied, a heating process that changes the structure of the wood at the cellular level, stabilising it against swelling and shrinkage caused by humidity changes. Contoured to fit the hand nicely, the handles have a domed end that resists chipping from glancing mallet blows.Overall lengths range from 7.1/2"(187mm) to 8"(200mm); blade length (including bolster) is about 3"(75mm). The 1/4"(6.35mm) chisel has a 30° primary bevel; the others are 25°. All have 2° micro-bevels and require only final honing before use.

60.80 72.96


Quantity:  






Veritas PM-V11 Butt Chisel - 3/4"(19mm)  (Ref: 506309)

Veritas PM-V11 Butt Chisel - 3/4

THIS IS ONE SINGLE CHISEL OF THE SIZE ABOVE

Key Features

Extremely durable PM-V11 steel alloy
At least twice the edge life of A2 steel
Highly wear-resistant, yet easy to sharpen
Blades lapped to a flatness tolerance of +/-0.0127mm
Maple handle, kiln-baked to seal it against humidity changes
Hardness is HRC 61-63
All have 2° micro bevels and require only final honing before use
Made in Canada


Butt chisels are made in wider sizes than most chisels, making them efficient for wasting out large areas, such as the mortices for installing butt hinges. They also have shorter blades that some woodworkers find offer improved control. Made from PM-V11 steel alloy, the blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance and minimal friction when working into an angled corner or a tight recess.Each blade is lapped flat. The blade and handle are connected with a tang and a socket-like stainless steel ferrule that seats directly onto the shoulder of the blade, with flats on the tang to prevent the handle from rotating. The hard maple handle has been torrefied, a heating process that changes the structure of the wood at the cellular level, stabilising it against swelling and shrinkage caused by humidity changes. Contoured to fit the hand nicely, the handles have a domed end that resists chipping from glancing mallet blows.Overall lengths range from 7.1/2"(187mm) to 8"(200mm); blade length (including bolster) is about 3"(75mm). The 1/4"(6.35mm) chisel has a 30° primary bevel; the others are 25°. All have 2° micro-bevels and require only final honing before use.

67.46 80.95


Quantity:  






Veritas PM-V11 Butt Chisel - 1.1/2"(38mm)  (Ref: 506311)

Veritas PM-V11 Butt Chisel - 1.1/2

THIS IS ONE SINGLE CHISEL OF THE SIZE ABOVE

Key Features

Extremely durable PM-V11 steel alloy
At least twice the edge life of A2 steel
Highly wear-resistant, yet easy to sharpen
Blades lapped to a flatness tolerance of +/-0.0127mm
Maple handle, kiln-baked to seal it against humidity changes
Hardness is HRC 61-63
All have 2° micro bevels and require only final honing before use
Made in Canada


Butt chisels are made in wider sizes than most chisels, making them efficient for wasting out large areas, such as the mortices for installing butt hinges. They also have shorter blades that some woodworkers find offer improved control. Made from PM-V11 steel alloy, the blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance and minimal friction when working into an angled corner or a tight recess.Each blade is lapped flat. The blade and handle are connected with a tang and a socket-like stainless steel ferrule that seats directly onto the shoulder of the blade, with flats on the tang to prevent the handle from rotating. The hard maple handle has been torrefied, a heating process that changes the structure of the wood at the cellular level, stabilising it against swelling and shrinkage caused by humidity changes. Contoured to fit the hand nicely, the handles have a domed end that resists chipping from glancing mallet blows.Overall lengths range from 7.1/2"(187mm) to 8"(200mm); blade length (including bolster) is about 3"(75mm). The 1/4"(6.35mm) chisel has a 30° primary bevel; the others are 25°. All have 2° micro-bevels and require only final honing before use.

88.30 105.96


Quantity:  






Veritas PM-V11 Butt Chisel - 2"(50mm)  (Ref: 506312)

Veritas PM-V11 Butt Chisel - 2

THIS IS ONE SINGLE CHISEL OF THE SIZE ABOVE

Key Features

Extremely durable PM-V11 steel alloy
At least twice the edge life of A2 steel
Highly wear-resistant, yet easy to sharpen
Blades lapped to a flatness tolerance of +/-0.0127mm
Maple handle, kiln-baked to seal it against humidity changes
Hardness is HRC 61-63
All have 2° micro bevels and require only final honing before use
Made in Canada


Butt chisels are made in wider sizes than most chisels, making them efficient for wasting out large areas, such as the mortices for installing butt hinges. They also have shorter blades that some woodworkers find offer improved control. Made from PM-V11 steel alloy, the blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance and minimal friction when working into an angled corner or a tight recess.Each blade is lapped flat. The blade and handle are connected with a tang and a socket-like stainless steel ferrule that seats directly onto the shoulder of the blade, with flats on the tang to prevent the handle from rotating. The hard maple handle has been torrefied, a heating process that changes the structure of the wood at the cellular level, stabilising it against swelling and shrinkage caused by humidity changes. Contoured to fit the hand nicely, the handles have a domed end that resists chipping from glancing mallet blows.Overall lengths range from 7.1/2"(187mm) to 8"(200mm); blade length (including bolster) is about 3"(75mm). The 1/4"(6.35mm) chisel has a 30° primary bevel; the others are 25°. All have 2° micro-bevels and require only final honing before use.

94.00 112.80


Quantity:  






Veritas Woodworking >  Veritas PM-V11 Butt Chisels



Veritas PM-V11 Butt Chisels
Buy online at www.quality-woodworking-tools.com with FREE mainland UK delivery for all woodworking tools





Veritas Tools Homepage
Veritas Checkout
  View Basket
Veritas Tools UK Delivery
Free UK Delivery