Veritas Tools
Veritas Tools
 



Veritas Vices & Clamping


Veritas Woodworking >  Veritas Vices & Clamping


Veritas Inset Vice  (Ref: 952803)

Veritas Inset Vice

Easy to install, instructions, template & hardware included
Vice fits flush to your bench top
13mm tall dog locates into one of two positions
Maximum travel 100mm
13mm diameter Acme-threaded steel rod
Machined steel castings & anodized aluminium extrusions
Minimum bench thickness 31.7mm (1.1/4")


This vice is easy to install in any bench with a top thickness at least 31.7mm (instructions, template and mounting hardware provided). The vice fits flush to your bench top and functions in a similar manner to a wagon vice. If your bench doesn’t have a tail vice then the Veritas Inset Vice coupled with a row of dog holes and a bench dog is exactly what you need. A knurled stainless-steel toggle handle turns a 13mm diameter Acme-threaded steel rod giving a travel of up to 100mm to a moving plate. A 13mm tall dog locates into this plate in one of two positions. Two positions allowing you to have dog holes on your bench top as far apart as 195mm. When the vice is not in use, removing the jaw leaves you with an unobstructed work surface. Constructed of machined steel castings and anodized aluminium extrusions. Made in Canada

63.10 75.72


Quantity:  






Veritas Tail Vice Screw  (Ref: 475227)

Veritas Tail Vice Screw

Clamping capacity of 430mm(17") less thickness of wooden jaws
28mm diameter screw with single-lead Acme thread
Mounting screws included
Wooden Handle not included, but can be purchased as an optional extra.


Essentially the same construction as a shoulder-vice screw but without an end guide, this tail-vice screw has a clamping capacity of 17" less thickness of wooden jaws (not included) and is 21" overall. 1.1/8" diameter screw with single-lead Acme threads. Mounting screws included. Wooden Handle not included, but can be purchased as an optional extra.

24.70 29.64


Quantity:  



Related products:
1. 1 1/8 Optional Handle for Veritas Vice (Ref: 210538)





1 1/8 Optional Handle for Veritas Vice  (Ref: 210538)

1 1/8 Optional Handle for Veritas Vice

5.16 6.19


Quantity:  






Veritas Tail Vice  (Ref: 474719)

Veritas Tail Vice

Used to build both types of tail vice, with or without a shoulder
Guide plates 50mm 2") wide by 380mm (15") long
Maximum opening 200mm (8") (less the thickness of your wooden jaws)
22mm 7/8") diameter Acme lead screw
Cast iron and steel components

The Veritas Tail Vice can be used for both types of tail vice with or without a shoulder.The Veritas Tail Vice has guide plates 50mm (2") wide by 380mm (15") long. The maximum opening is 200mm (8") (less the thickness of your wooden jaws). The single-lead Acme screw is 22mm(7/8") in diameter.

51.18 61.42


Quantity:  






Veritas Panel Clamp  (Ref: 475209)

Veritas Panel Clamp

Eliminates bowed panels by exerting balanced tension on clamp bars
The greater the pressure, the more rigid the bars become
Serrated posts grip the wooden clamp bars
Keeps panels flat under any pressure without allowing bars to lift
Tightens by hand and the system is stackable for production work
Clamp from 16mm to 50mm thick while keeping clamp pads centred on stock.
Screw has 125mm of travel.
Made from steel with a black oxide finish & solid brass
Panel clamp set includes one head and one tail.
Wood not included.


Bowed panels can be a thing of the past. This Veritas® product is the most effective panel clamp available. It is easy to use, tightens by hand, and is stackable for production work. Best of all, you can make double clamp bars of any length to suit your own needs. The specially serrated posts grip the bars, keeping a panel flat under any pressure load without allowing the bars to lift. Bars can be made by drilling 19mm diameter holes in straight stock. 2 x 2s are fine, but 2 x 4s let you stack panels, since there is room for the top of one post and the bottom of another in the same hole. Adjustable O-rings on the posts let you clamp anything from 16mm to 50mm thick without any shimming; the clamp pads can be set dead center on the stock. The secret to the system is the balanced tension exerted on the bars. The greater the pressure, the more rigid the bars become. The screw has 125mm of travel. The panel clamp set, with one head and one tail, does not include the wood. Made in Canada.

28.57 34.28


Quantity:  






Veritas 4-Way Speed Clamp  (Ref: 475309)

Veritas 4-Way Speed Clamp

Speed-clamping nuts allow fast adjustments
Hold really securely when tightened
Includes 2 corners (strong, glass-filled nylon, brass inserts)
4 speed-clamp nuts and 4 x 1/4" UNC threaded rods
Clamps up to 585mm (23") to 1,120mm (44") square or 1,650mm (65") by 585mm (23") rectangle


The fastest adjusting frame clamp on the market. Completely knurled for good grip, the speed-clamping nuts are designed to let you make fast adjustments, yet hold securely when you tighten them.They are cross drilled to slide easily on the rods until they come up against a corner clamp; then their threads engage. To release them, you just have to back them off a turn or two and they are then free sliding again.The speed clamp includes four corners (strong, glass-filled nylon with brass inserts), four speed clamping nuts and four 1/4" UNC threaded rods that will clamp up to 585mm(23") square. To increase clamping capacity to 1,120mm (44") square or 1,650mm (65") by 585mm (23") rectangle, an extension set is included; it contains four 1/4" UNC threaded rods and four coupling nuts. The rods and coupling nuts have a black-oxide finish. Made in Canada.

24.50 29.40


Quantity:  






Veritas Front Vice - Regular  (Ref: 510536)

Veritas Front Vice - Regular

Machined double guide rods, single-lead Acme screws
Regular front vice is 175 x 375mm (7" x 14.3/4") with a clamping capacity of 210mm (8.1/4")
Note capacity quoted is less the thickness of any wooden jaws fitted
Large front vice has an offset center screw to prevent skewing
Cast iron and steel components
Turned wooden handle available separately


These vices have rugged, machined, double guide rods and single-lead Acme screws.The regular front vice is 175mm (7") x 375mm (14.3/4") overall with a 22mm (7/8") dia. screw and clamping capacity of 210mm (8.1/4") (less the thickness of your wooden jaws).This powerful vice can be added to an existing bench or built into a new one. A turned wooden handle is available separately.

40.37 48.44


Quantity:  



Related products:
1. 1 1/8 Optional Handle for Veritas Vice (Ref: 210538)





Veritas Front Vice - Large  (Ref: 474642)

Veritas Front Vice - Large

Machined double guide rods, single-lead Acme screws
Large front vice is 265 x 533mm (10.1/2" x 21") with a clamping capacity of 330mm(13")
Note capacity quoted is less the thickness of any wooden jaws fitted
Large front vice has an offset center screw to prevent skewing
Cast iron and steel components
Turned wooden handle available separately

This vices has rugged, machined, double guide rods and single-lead Acme screws.The large front vice is 265mm(10.1/2") x 533mm(21") overall with a 28mm(1.1/8") dia. screw, and 330mm(13") clamping capacity (less the thickness of your wooden jaws). The larger vice has an offset centre screw to allow vertical clamping without skewing. This powerful vice can be added to an existing bench or built into a new one. A turned wooden handle is available separately.

63.48 76.18


Quantity:  



Related products:
1. 1 1/8 Optional Handle for Veritas Vice (Ref: 210538)





Veritas Twin-Screw Vice  (Ref: 500226)

Veritas Twin-Screw Vice

The only non-racking, parallel action, full width end vice
Applies an even clamping force along jaws
300mm maximum capacity
Easy to fit to an existing bench
Telescoping chain cover
Supplied with two vice screws, nuts, chain, chain cover and wooden handles


The Veritas Twin-Screw Vice is the only non-racking, parallel action, full width end vice on the market. It applies an even clamping force along the jaws regardless of which of the screws is tightened. Even better, a spring loaded locking pin enables the connecting chain to be disengaged for controlled 'skewing' when slightly tapered workpieces need to be held. Maximum capacity 300mm. The Veritas Twin-Screw Vice is easy to fit to an existing bench, requiring only the addition of an end cap drilled for the vice nuts and fixing bolts plus the vice jaw itself. The telescoping chain cover lets you set the spindles from 11" to 20" apart. Enough chain is included for 16" spacing, adequate for benches up to 32" wide. The kit includes the two vice screws, nuts, chain, chain cover, wooden handles, all the hardware and full fitting and mounting instructions (wooden jaws not included).

187.48 224.98


Quantity:  






Veritas Shoulder-Vice Screw  (Ref: 475258)

Veritas Shoulder-Vice Screw

Use to build an L-shaped shoulder vice on a Scandinavian-style workbench
28mm(1.1/8") diameter screw with single-lead Acme threads
185mm(7.1/4") clamping capacity
330mm(13") overall length


Used to build an L-shaped shoulder vice on a Scandinavian-style workbench. 1.1/8" diameter screw with single-lead Acme threads. Threaded guide mortises into the vice shoulder; end guide attaches to the vice jaw. 7.1/4" clamping capacity (less wooden shoulder thickness). 13" long overall. Depending on supply, casting colour may vary.

19.74 23.69


Quantity:  






Veritas Carver's Vice  (Ref: 474520)

Veritas Carver's Vice

Adjustable in all three dimensions
Can be mounted in a variety of ways
Optional dog mounting kit
Supplied with 90mm(3.1/2") mounting plate
Optional 50mm(2") plate also available


Any good carver's vice should be adjustable in all three dimensions. The Veritas vice has full rotation in two and up to 75mm (3") of height adjustment in the third. An internal arrangement of a spring and an 'O' ring ensures that repositioning the workpiece is a smooth, controlled operation, with no violent swings or movements, allowing precise placement for the next angle of attack. The layout of the base enables the vice to be mounted in a variety of ways, clamped in a vice, permanently fixed to a bench (side or top) or through a 19mm(3/4") dog hole with the optional dog mounting kit. The mounting plate provided with the vice is 90mm (3.1/2") diameter and there is an additional 50mm (2") diameter one also available. As with all Veritas products, form and function are combined to present a very superior tool. High quality materials and excellent workmanship mean this vice is going to serve the carver's needs for many, many years.

86.80 104.16


Quantity:  






Veritas Dog-Hole Mount Assembly  (Ref: 476880)

Veritas Dog-Hole Mount Assembly

8.93 10.72


Quantity:  






Veritas Mounting Plate with Rod 50mm (2")  (Ref: 476672)

Veritas Mounting Plate with Rod 50mm (2

9.32 11.18


Quantity:  






Veritas Mounting Plate with Rod 89mm (3.5")  (Ref: 475586)

Veritas Mounting Plate with Rod 89mm (3.5

20.34 24.41


Quantity:  






Veritas Woodworking >  Veritas Vices & Clamping



Veritas Vices & Clamping
Buy online at www.quality-woodworking-tools.com with FREE mainland UK delivery for all woodworking tools





Veritas Tools Homepage
Veritas Checkout
  View Basket
Veritas Tools UK Delivery
Free UK Delivery

Newsletter Subscription